29
CHAPTER 4: Operation
5. Select option 12. This screen will appear:
**********************************************************
*
*
* WARNING !!!
*
*
*
* THIS ACTION WILL ENABLE YOU TO DOWNLOAD
*
* A NEW SOFTWARE VERSION AFTER RESET.
*
* * * *
*
* Type:
*
* LINK1 for download through link 1.
*
* LINK2 for download through link 2.
*
* LINK3 for download through link 3.
*
* CHAN1 for download through front channel 1.
*
*
*
* You should connect a terminal configured:
*
* 9600, N, 8, 1 to the desired port.
*
*
*
**********************************************************
6. Type “CHAN1” and press [Enter] if the PC is attached to the control port;
type “LINK1” and press [Enter] if the PC is attached to main-link port 1, etc.
(If you select a main-link port, make sure that that port is an RS-232 type and
is configured for async operation. If you try to select a non-RS-232 main-link
port, the download channel will automatically default to CHAN1, the front-
panel control port.) After you make your selection, you will be returned to
the System Control Menu.
7. Reset the Switch by either (a) selecting option 9 at the System Control Menu
(the preferred method), (b) pressing the RESET button onthe Switch’s front
