8
V.35 SINGLE FIBER DRIVERS
The V.35 Single Fiber Drivers are high-speed fiber modems that support full-
duplex, point-to-point V.35 communication over a single multimode fiber.
Running at synchronous speeds up to 256 Kbps, the V.35 Single Fiber Drivers
automatically adapt to hardware or software flow control, and can be set for
internal, external, or received recover clocking.
Connect optical fiber to the Driver with an ST or SMA interface. The Driver’s
V.35 DTE interface is a female M/34 connector (see
Appendix B
for its
pinout).
The V.35 Single Fiber Driver features local and remote loopback tests, six
front-panel LEDs, and externally accessible configuration switches.
For proper operation, these Drivers must be used in pairs.
2. Introduction
