18
ASYNC/SYNC 2-WIRE SHORT-HAUL MODEMS
While the A/S2W SHM is ON, operating personnel are not exposed to more
than 30 volts on any card or on any accessible area of the DC power supply.
Nevertheless, never open the unit or try to maintain or reconfigure it while it is
plugged in.
The AC cord is fused at the rear panel of the unit. If this fuse blows, make sure
you replace it only with a fuse rated for the required current and of the specified
type (0.2-A slow-blow for ME375A-R2 and ME376A-R2, 0.1-A slow-blow for
ME375AE-R2 and ME376AE-R2). An extra fuse should have been included with
the unit. Until you replace a blown, damaged, or missing fuse, unplug the unit and
make sure that no one attempts to use it. Avoid using repaired fuses, and never
“get by” without the fuse by short-circuiting the fuse holders!
Summary of Contents for ME375A-R2
Page 33: ...NOTES...
