21
3.3.4 O
PTION
#2: C
LOCK
M
ODE
If option 2 is selected in the Software Configuration menu, the Line Driver will
display the Clock Mode menu. This menu will allow you to set the clock mode for
the mDSL Line Driver standalone unit (ME0007A-mDSL). After making your
selection, the Line Driver will display the Software Configuration menu.
Figure 3-6. Clock Mode selection menu.
3.3.5 O
PTION
#3: DTE I
NTERFACE
T
YPE
If option 3 is selected in the Software Configuration menu, the Line Driver will
display the DTE Interface Type menu. This menu allows you to select the type of
QuikConnect module that is installed in the Line Driver. By default, the Line
Driver is set for serial/Ethernet interface. This selection will cover almost all of the
Black Box QuikConnect modules except the G.703/G.704 QuikConnect module.
If you are using this interface and it supports n x 64 kbps G.704 network extension,
then you should set the interface type for 2) G.703/G.704 interface.
Figure 3-7. DTE Interface Type menu.
DTE Interface Type Selection Menu
1) Serial/Ethernet Interface
2) G.703/G.704 Interface
Please Enter Your Selection: (1–2)
Clock Mode Selection Menu
1) Internal Clock
2) External Clock
3) Receive Recover Clock
Please Enter Your Selection: (1–3)
CHAPTER 3: Configuration
