19
CHAPTER 3: Configuration
3.3.2 S
OFTWARE
C
ONFIGURATION
M
ENU
When the correct password is entered, the Software Configuration menu will
appear. Select the option that you would like to change.
NOTE
After making any configuration changes, you are required to select the
“Exit and Save Changes” if you would like the changes to be
implemented into the Line Driver.
The Software Configuration menu is shown in Figure 3-4.
Figure 3-4. Software Configuration menu.
Local Software Configuration Menu
1) DTE Rate
2) Clock Mode
3) DTE Interface Type
4) DTE Loopback
5) Transmit Data Sampling Point
6) CO/CP Mode
7) Change Password
8) Exit Without Saving Changes
9) Exit and Save Changes
Please Enter Your Selection (1–9)
