18
QUIKCONNECT MDSL LINE DRIVER
3.3 VT100 Terminal Configuration
You can configure the Line Driver using a VT100 compatible terminal (or
program). With the VT100 interface, you can perform all functions available via
the DIP switches. The VT100 operation is available from the Main menu page.
3.3.1 M
AIN
M
ENU
S
CREEN
The Main menu screen for the Line Driver is displayed in Figure 3-3. You can press
Esc to refresh this screen at any time. If you are running in the Monitor mode, the
Line Driver will not require a password. If you want to run in the Configuration
mode, you will be required to enter a password to access to configuration menus.
The default password shipped with the Line Driver is “blackbox” (all lower case).
The Line Driver is case-sensitive and will not work if the correct password is not
installed. If an incorrect password is entered, you will receive an error message and
be prompted for the password again. We suggest that you change your password
after setting up your Line Driver to ensure security for your network.
Figure 3-3. Main menu.
VT100 Software Configuration
Black Box Corporation Copyright (c) 2001
Software version x.xx.xx
Active Configuration:
Plug-and-play mode
DTE Rate:
2304 kbps
Clock Mode:
Receive Recover Clock
DTE Interface Type:
Normal Mode
DTE Loopback:
Disable
Transmit Data Sampling Point:
Normal
Connection Status:
Data Mode
CD (Carrier Detect):
Active
CTS (Clear to Send):
Active
DSR (Data Set Ready):
Active
RTS (Request to Send):
Inactive
DTR (Data Terminal Ready):
Inactive
Press Esc to Refresh screen
Please Enter Password:
