724-746-5500 | blackbox.com
Page 12
Chapter 3: System Installation
3.2 Using the External Antenna
If you prefer to use the external antenna with N-type connector for your application instead of the built-in directional antenna,
follow the steps below.
1. Grab the black rubber on the top of the Wireless P-T-P Ethernet Extender, and slightly pull it up as shown in Figure 3-7. The
metal N-type connector will appear.
Figure 3-7. Installing the external antenna.
2. Connect your antenna with the N-type connector on the top of the Wireless P-T-P Ethernet Extender.
NOTES:
1. Before connecting the external antenna with the N-type connector to the Wireless P-T-P Ethernet Extender, users should
prepare the cable in advance, if needed.
2. While connecting the N-type connectors, users should be careful not to damage the connectors.
WARNING: Users MUST power off the Wireless P-T-P Ethernet Extender first before connecting the external antenna to it. Do not
switch from the built-in antenna to the external antenna from Web management without physically attaching the
external antenna onto the Wireless P-T-P Ethernet Extender. Otherwise, the Wireless P-T-P Ethernet Extender might be
damaged.
Summary of Contents for LWE100A
Page 22: ...724 746 5500 blackbox com Page 22 NOTES ...
Page 23: ...Page 23 NOTES ...
