18
PURE NETWORKING 802.11G WIRELESS ACCESS POINT WITH SWITCH
Table 4-1. Status and information screen options.
Parameter
Description
Alias Name
The access point’s alias name. Assign an alias name in
AP mode, station-ad hoc mode, station-infrastructure
mode, and AP bridge-WDS mode. See
Section 4.2.2
for
a description of each mode.
Uptime
The amount of time that the access point has been active
since the last reboot or power on.
Runtime Code
This is the current operating code version.
Version
Mode
AP (Access Point), station, bridge, or WDS (Wire
Distributed System Repeater) mode.
ESSID
The ESSID (up to 31 printable ASCII characters) is the
unique name identified in a WLAN. The ID prevents the
unintentional merging of two co-located WLANs. Make
sure that all stations’ ESSIDs in the same WLAN network
are the same. The default ESSID is “default”. Assign an
alias name in AP mode, station-ad hoc mode, station-
infrastructure mode, and AP bridge-WDS mode.
Channel Number
Select the appropriate channel from the list provided to
correspond with your network settings. Channels differ
from country to country.
Channel 1–11 (North America)
Channel 1–14 (Japan)
Channel 1–13 (Europe)
Assign an alias name in AP mode, station-ad hoc mode,
AP bridge-point to point mode, AP bridge-point to
multipoint mode, and AP bridge-WDS mode.
Security
This selects whether WEP is enabled or disabled.
Summary of Contents for LW6004A
Page 3: ......
