1. Specifications
Standards:
IEEE802.3u 10/100Base-TX, 100Base-FX, IEEE802.3af Power over Ethernet
UTP Cable:
Cat. 5 cable or up, up to100 meter
Fiber Cable:
50/125, 62.5/125 or 100/140
μ
m multi-mode
8.3/125, 8.7/125, 9/125 or 10/125
μ
m single-mode
PSE Power Feeding Supports:
Endpoint:
via TP pin 1, 2, 3, 6
LED Indicators:
POWER, PoE, TP LNK/ACT, 100, FX LNK/ACT, FDX/COL, 4W, 7W, 15.4W
Data Transfer Rate:
148,800 pps at 100 Mbps; 14,880 pps at 10 Mbps
Flow Control:
IEEE802.3x compliant for full duplex; Backpressure flow control for half-duplex
Power Requirement:
100–240 VAC, 50–60 Hz
Power Consumption:
24W
Temperature Tolerance:
32
˚
to 122
˚
F (0
˚
to 50
˚
C)
Relative Humidity:
5% to 90%
Size:
1.6"H x 6.2"W x 5.2"D (40 x 158 x 133 mm)
NOTE
For connecting this device to Router, Bridge or Switch, please
refer to the corresponding device's Technical Manual.
PSE PoE 10/100BASE-TX to 100BASE-FX Media Converter
4
Summary of Contents for LPM600A
Page 1: ...Copyright 2006 Black Box Corporation All rights reserved...
Page 3: ......
