Black Box LPH240A-H Operation Manual Download Page 47

Page: 47 / 56

Chapter 4: Operation

724-746-5500 | blackbox.com

Page 47

4.3

Dual LEDs, Front-panel and side-panel

LED Description

PWR

Illuminates GREEN to indicate power applied.

LK/ ACT

Steady ON for LINK w/no traffic, blinking for activity per port.

LINK will turn off in the event connectivity is lost between the

ends of the twisted pair segment or a loss of power occurs in

the unit or remote device. The Link ports are also

represented by LA1, LA2, LA3…LA6. (Steady On or steady

Off indicates no Receive Activity).

10/100

Steady ON for 100Mb speed, OFF for 10Mb speed per port

(copper

ports)

F/H (FH1, FH2)

Steady ON for Full duplex (F/D) mode, OFF for Half

duplex (H/D) mode per port (For fiber port only)

NOTE:

The port #1 and 2 is being assigned for copper or fiber port for

different models. On all copper 10/100 ports model (e.g LPH240A-H-48),
the LEDs 10 or 100 denotes for copper port only. For the model 4 copper
+2 fiber or 5 1fiber, (e.g LPH240A-H-2SC-48) the F or H denotes
for fiber port only.

Summary of Contents for LPH240A-H

























































Search results

Summary of Contents for LPH240A-H

Reviews:

Related manuals for LPH240A-H

Brands by name

Popular brands

Black Box LPH240A-H, Operation Manual

Search results

Summary of Contents for LPH240A-H

Reviews:

Related manuals for LPH240A-H

Brands by name

Popular brands