Using the Web Configuration and Management Interface
Manual Documentation Number: LPD40xA-1105m
25
Black Box Corporation - 1000 Park Drive - Lawrence, PA 15055-1018
www.blackbox.com
-- Tech Support and Ordering: 724-746-5500 - Fax: 724-746-0746
GPIO is not supported in the LPD401A
but it is possible to use the
Send alarms based on GPIO pin states
feature to generate alarms based on
the condition of some RS-232 hardware handshake lines. For assistance in
implementing this feature contact Black Box Technical Support.
To
Send alarms based on serial data pattern matching,
select that option
and type a character string into the text box provided.
Alarm Destinations
Alarm Destinations
allows you to specify where to send alarm notification
emails, their priority and subject title. Type the information into the
Mail to
email address,
CC
address, set the
Priority
and type in the
Subject
line.
To send an SNMP trap, select
Send SNMP trap to following destination
when alarm occurs
and type the destination IP address for the SNMP trap.
Summary of Contents for LPD401A
Page 5: ......
