Configuring the IP Address
14
Manual Documentation Number: LPD40xA-1105m
Black Box Corporation - 1000 Park Drive - Lawrence, PA 15055-1018
www.blackbox.com
-- Tech Support and Ordering: 724-746-5500 - Fax: 724-746-0746
Identify your LPD401A by its MAC address (printed on
a label on the LPD401A).
If you need to change the IP address of the LPD401A, you can
accomplish this using the discovery software, or you can open the Web
Configuration and Management Interface and do it there. (See Configuring
Network Settings later in the next chapter.)
1.
To change the IP address of the LPD401A from the
discovery software, click
Configure IP Settings
.
2.
In the dialog that appears, select
Manually configure network
settings
.
3.
Type the new
IP Address
,
Subnet Mask
,
Default Gateway
and
system password (initially
dbps
) in the appropriate boxes, then click
Apply
.
4.
Click
Reboot Device
. This may take a minute or more to complete.
5.
Click
Refresh List
to confirm the new IP address has been
accepted.
Summary of Contents for LPD401A
Page 5: ......
