Using the Web Configuration and Management Interface
Manual Documentation Number: LPD40xA-1105m
17
Black Box Corporation - 1000 Park Drive - Lawrence, PA 15055-1018
www.blackbox.com
-- Tech Support and Ordering: 724-746-5500 - Fax: 724-746-0746
Figure 11. Network, IP Settings Page
IP Settings
The
IP Settings
section allows you to select between dynamic or static IP
addressing. The LPD401A default setting is
Obtain an IP
address automatically using DHCP
, or dynamic IP addressing.
When the LPD401A is first connected it will try to obtain an IP
address automatically. If it fails, it will assign an IP address to itself using the
Automatic Private IP Addressing (APIPA)
protocol. You can re-configure the
LPD401A/ for static IP address by selecting
Use the following IP
address
and assign the IP address yourself.
If
Use the following IP address:
is selected, you are choosing static IP
addressing. When this option is selected the
IP Address, Subnet Mask
and
Default Gateway
text boxes become available. You must determine the
appropriate parameters and enter them yourself. (If you do not know what to
enter ask your network administrator for assistance.)
To implement any changes in this section, click
Apply.
A page will appear
asking you to
Reboot
the LPD401A so that the changes can take
effect.
Network Services Settings
The
Network Services Settings
section allows you to enable or disable
several common network services and configure their associated ports.
Typically you will not have to change these settings.
Summary of Contents for LPD401A
Page 5: ......
