8
NETWORKING HUB
The front panel has Link/TX and RX LEDs for each RJ-45 port, numbered for the
corresponding ports (see Figure 2-1), and one LED for AC power. Observing the
operation and status of the ports is easy.
Figure 2-1. Front panel.
The included external wallmount power supply uses AC input power of
120 VAC/60 Hz. Its lightweight cord carries DC power to the barrel-type power
jack on the rear panel (shown in Figure 2-2).
Figure 2-2. Rear panel.
2.2 Features and Benefits
• Interoperability with other Ethernet devices: The Networking Hub is
interoperable with other Ethernet-compliant network devices. Each is fully
compliant with IEEE 802.3 specifications for 10-Mbps CSMA/CD operation.
This allows the hub to be integrated into any standard 10-Mbps Ethernet
network.
• Installation versatility: The hub’s small size makes it very unobtrusive, so it fits
easily into almost any home, office, or lab location.
• Robust network operation: The hub uses the “star” network topology and has
automatic per-port partitioning and reconnection. A fault on one segment is
isolated from the rest of the network, avoiding most network downtime.
Summary of Contents for LE2750A
Page 2: ......
