16
10BASE-T TO THINNET MEDIA CONVERTER
3. Power on the converter. The power LED should
light. If it does not, make sure that the power
cable is plugged in properly.
4. Make sure that the Category 5 straight-through
twisted-pair cable between the 10BASE-T device
(hub or switch) and the converter is no longer
than 328 ft. (100 m).
Figure 3-5. Distance between the 10BASE-T device and the converter.
5. Connect one end of the cable to the RJ-45 jack on
the converter.
6. Connect the other end of the cable to the RJ-45
jack on the 10BASE-T device.
7. Check the corresponding port LED on the
converter to be sure that the connection is valid.
(Refer to
Chapter 4
.)
328 ft. (100 m)
To 10BASE-T
hub or switch
UTP
Summary of Contents for LE1604A-AU
Page 3: ......
