Chapter 3: Installation
724-746-5500 | blackbox.com
Page 33
Installation of the LBH21-Series Converter Switches is a simple
procedure. The installation location is dependent upon the physical
layout of the Ethernet network and associated cabling. Make sure the
unit is installed in a location that is easily accessible to an AC power
outlet or the appropriate DC source and where cooling is not inhibited.
The green Power (PWR) LED must turn ON when power is applied.
3.2
LE1505-RACK for Rack mounting applications
For 19” rack-mounting of LBH21-Series Converter Switches, a
rackmount tray is available, the LE1505-RACK. The Converter Switches
are mounted with the DC power jack in the back, with the fiber and the
RJ-45 connector in the front. Any mix of the Converter Switches and/or
Media Converters may be placed on a tray, up to a maximum of 16 units.
(The mounting spaces of the LBH21-Series are specific to the Black Box
LBH10, LBH11 and LBH21-Series products and will not permit other
models to be properly mounted).
