Chapter 3: Installation
724-746-5500 | blackbox.com
Page 34
In a typical installation, the LE1505-RACK, 19” rack-mount tray
will hold a few (three to eight) LBH21-Series Converter Switches, with
their power supplies plugged into power strips (not included) in the rear
area of the tray. Metal mounting screws in the bottom-front hold the
Converter Switches firmly in place. The beveled-top edge of the units
permits the LEDs of each unit to be viewed for operational status, even
when the units are very close together.
3.3
LH1505P-RACK for Rack Mounting
The LH1505P-RACK is another option for rack mounting the
LBH21-Series Switches together in a 19” rack-mount tray. These models
come with a built-in common universal AC power supply rated at 55 watts
at 50
°
C ambient, 9 VDC regulated output, and supporting up to 16
Switches for LH1505P-RACK.
The side-view above is an example of an installation of the
model LH1505P-RACK, 19” rack-mount tray, holding a few Switches,
each with their power input plugged into the built-in common AC power
supply in the rear area of the
tray. (PS units that come with
the MC’s are not used).
Metal
mounting
screws in the bottom-front
hold each of the media
converters securing them in
the tray and enabling
separate removal for service.
The dual LEDs permit
viewing of Switch status from
any angle.
