Installation
This chapter gives step-by-step installation instructions for the Ethernet
Extender.
Selecting a Site for the Equipment
As with any electric device, you should place the equipment where it will not
be subjected to extreme temperatures, humidity, or electromagnetic
interference. Specifically, the site you select should meet the following
requirements:
y
The ambient temperature should be between -20 to 60 degrees Celsius.
y
The relative humidity should be less than 90 percent, non-condensing.
y
Surrounding
electrical
devices should not exceed the electromagnetic
field (RFC) standards.
y
Make sure that the equipment receives adequate ventilation. Do not
block the ventilation holes on each side of the equipment.
y
The power outlet should be within 1.8 meters of the product.
Connecting to Power
y
This Ethernet Extender is a plug-and-play device.
y
Connect the supplied AC to DC power adaptor to the receptacle on the
rear panel of the Ethernet Extender, and then attach the plug into a
standard AC outlet.
CUSTOMER
Order toll-free in the U.S. 24 hours, 7 A.M. Monday to midnight Friday:
SUPPORT
877-877-BBOX FREE technical support, 24 hours a day, 7 days a week:
INFORMATION
Call 724-746-5500 or fax 724-746-0746
Mail order:
Black Box Corporation
, 1000 Park Drive, Lawrence, PA 15055-1018
Web Site: www.blackbox.com
y
E-mail: [email protected]
