Page 11
724-746-5500 | blackbox.com
Chapter 2: Overview
2.2.2 Rear Panel
Figure 2-2 shows the IP KVM Switch Module’s rear view. Table 2-1 describes the
components numbered in the illustration.
6
7 8 9 10 11 12
1 2 3 4 5
Figure 2-2. The IP KVM Switch Module’s rear-panel view.
Table 2-1. Rear-panel components.
Number
Component
Description
1
R-port (KVT1IP8UV and
For serial device management
KVT1IP16UV only)
with KV9-SRL.
2
Reset button
This dual-function button selects Power
Reset or Restore Factory Defaults.
3
RJ-45 connector
Links to the LAN.
4
Sys OK LED
Lights when the network is on.
5
6-pin mini DIN connectors
Connect to the shared console
keyboard and mouse ports.
6
HD15 connectors
Functions as a 3-in-1 connector to link
to 1, 8, or 16 servers, mice, and
keyboards.
7
Barrel connector
Connects to a 12-VDC external power
adapter.
8
8-pin mini DIN connector
Reserved for future use.
9
IP Setup button
Press this button with a paper clip or
pen to bring up the IP-OSD menu.
10
DB9 COM/RS-232 connector Connects to a PC for initial setup only.
11
Eth Act LED
Lights when the network is active.
12
HD15 connector
Connect to the shared console monitor.
