1 3
CHAPTER 3: Installation
3.5 Organizing the Cables (Optional)
If you haven’t installed the Cable Management Bar but
would still like to group the cables, or at least keep them
together for running elsewhere, you can tie bundles of
them together with the included cable ties.
Whether you’ve installed the Bar or not, you can use
the included sheet of label strips and plastic sheaths to
identify which port or cable is which. First, remove the
covering from the adhesive backing on one or both of the
plastic sheaths, then mount the sheath(s) on the Panel
and/or the Bar. Then tear off a strip of the label paper
and fold it in half along the crease; cut it into small
sections if you want to label ports, cables, or cable groups
with individual squares of paper. Write, stamp, color-
code, etc., the label paper as you like and slide it into one
of the sheaths to the desired position. (If you would like
to make more labels than there is paper for, or if you
need to replace the labels later, you can make more labels
from any thick or well-folded paper.)
A more elegant way to identify ports is by using Color
Icons of various colors (FT940 through FT948). The
Icons are designed to snap right into the Panels directly
above their RJ-45 ports. Call Black Box if you would like
some of these.
Summary of Contents for JPM110A-R2
Page 17: ...NOTES ...
