1 2
BLACK CAT CAT5 PATCH PANELS
Figure 3-2. Using a punchdown tool to hardwire the Panel.
7. Push the tool and punch the wire down. The tool
will force the wire into the contact gap and lop off
the wire’s protruding end.
8. Repeat steps 6 and 7 for each of the seven other wires.
That’s all there is to it. Repeat this process for all of the
cables you would like to hardwire to the Black Cat CAT5
Patch Panel.
Once you have finished hardwiring cables, put a
connector cap on each of the Panel’s Type 110 connectors
that you have left empty. Now you can attach and
remove patch cables terminated with RJ-45 plugs to and
from the active sockets on the front of the Panel at will.
Summary of Contents for JPM110A-R2
Page 17: ...NOTES ...
