Black Box JPM110A-R2, Manual

Page: 11 / 17

1 0
BLACK CAT CAT5 PATCH PANELS
4. Face the Type 110 (rear) side of the Panel and find
the connector you want to use. The connectors are
arranged in groups of eight: Viewed from the rear,
the connectors with the lowest RJ-45 (front) side
numbers (1 through 8) will be on the far right; the
next group (9 through 16) will be the second from
the right; and so on. The eight connectors in each
group are indiviually numbered on the Type 110
side from 1 to 8, starting with “1” in the upper
right-hand corner and zigzagging up and down to
“8” in the lower left-hand corner. So, for example,
on a 32-port Panel, the Type 110 connector for port
19 will be in the third group of eight from the right,
and will be the second connector from the right in
the upper row (the connector labeled “3”). See
Figure 3-1 below.
Figure 3-1. A group of eight Type 110 connectors on the back
of an EIA/TIA-568A model of the Panel.
1 2
5
CA
T
5
CA
T
T568A
3 4 5 6 7 8