23
Chapter 5: Installing ISDN TA/V Without Using the
Intro
Program
This chapter should only be followed if you are unable to load and use the
Intro
software as described in
Chapter 3
It explains how to install your ISDN
TA/V, describes the function of the front panel LEDs, and also details the
special cable requirement for Macintosh computer users.
5.1 Connecting Your ISDN TA/V
Use Figure 5.1 and the following steps to connect the ISDN TA/V between
your computer and the ISDN line:
Figure 5.1 Front and Back Views of the ISDN TA/V
1) Ensure that both your computer and the ISDN TA/V are powered off
(The half of the back-panel
ON/OFF
switch with a circle is depressed).
2) Connect the supplied power lead into the socket marked with the proper
voltage indication on the ISDN TA/V.
3) Plug the other end of the mains lead into a mains socket.
5. Installing the ISDN TA/V Without
Using the Intro Program
POWER
ISDN OK
SEND
RECEIVE
ANSWER
TERMINAL 1
TERMINAL 2
ON-LINE 1
ON-LINE 2
LINE
CONTROL
RESET
DTE
0.5A(T)
250V
~
I
0
220 - 240V
50 - 60 Hz
1A
~
