Passive CCTV Hub Installation Guide
Page 13
3.6.
Installation Procedure – Model IC563A
The Passive CCTV Hub, Model IC563A features screw terminal connectors on the
video portion of the device, thereby allowing it to be connected via twisted pair to
the head end equipment (DVR). Video baluns, such as the IC444A, must be used
at the DVR to convert back to coaxial cable. In order to install the product in this
configuration, please follow the steps below:
1.
Install the Passive CCTV Hub in its final location. Please verify that the distance
between the cameras and the head end are within Black Box specifications.
2.
Connect a Black Box passive CCTV Balun (Black Box p/n IC440A, IC444A,
IC452A, IC451A, IC560A or IC561A) to each CCTV camera video output.
Please refer to the appropriate CCTV balun installation guide for details.
3.
Connect one Cat5 cable from each camera to one of the modular RJ45 ports on
the front of the Passive CCTV Hub (fig 12). Please ensure that EIA 568 wiring
and straight-through polarity is respected between the CCTV balun and the
rack. The use of other Cat5 connection hardware such as patch panels and 110
blocks may be used.
Figure 12: Camera connection
