13
3. For Mac OS X users open the System Profiler to confirm that the Remote Port USB
2.0 has installed correctly. In the left hand column under Hardware, select “USB”
and inspect the right hand panel. If the Remote Port USB 2.0 has been installed
correctly you should find it listed as a Hub under the USB High-Speed Bus/USB
Bus.
4. If the Remote Port USB 2.0 is not detected correctly or fails to detect please
consult the Troubleshooting Guide.
NOTE
To open System Profiler in OS X:
Open the Finder, select Applications, then open the Utilities folder and double click on the System Profiler icon.
To open Device Manager in Windows 2000 or XP:
Right click “My Computer” then select: Properties >> Hardware tab >> Device Manager button
To open Device Manager in Windows Vista:
Open the Start menu, right click on “Computer” then select: Manage >> Device Manager
3.6 Connecting a USB Device
1. Install any software required to operate the USB device(s). Refer to the
documentation for the USB
device(s), as required.
2. Connect the USB device to the Device port on the Remote Unit.
3. Check that the Device is detected and installed properly in the operating system.
CHAPTER 3: Installation
