16
USB X-TENDER
4.1.1 A
PPLICATIONS WITH A
S
INGLE
USB P
ERIPHERAL
Attach the peripheral device to the “channel 1” port on
the rear of the USB X-Tender’s Device-Interface
Module, as shown in Figure 4-1. (If the device has a
nondetachable USB cable, plug the device directly into
the X-Tender. If the device has a USB port only, run one
of the X-Tender’s included USB cables between the
device and the X-Tender.)
Use one of the X-Tender’s included USB cables to
attach one of the host computer’s USB ports to the
“channel 1” port on the rear of the X-Tender’s Host-
Interface Module.
