11
CHAPTER 2: Introduction
2. Introduction
The USB X-Tender is designed to connect computers to
Universal Serial Bus (USB) peripherals across much
longer distances than USB would normally allow: up to
150 ft. (45.7 m) if any high-speed devices are involved,
or up to 1000 ft. (304.8 m) to low-speed devices only.
The X-Tender comes from the factory with all of the
components shown in Figure 2-1. If anything is missing
or damaged, call Black Box Technical Support.
Figure 2-1. What you get with the USB X-Tender.
Device-Interface Module
Host-Interface Module
Device-Interface Module’s power supply (input cord might not be included)
Two 6-ft. (1.8-m) USB cables
