Black Box Corporation
1000 Park Drive, Lawrence, PA 15055-1018
USA, Canada: www.blackbox.com,
EU, Africa, Asia, South America, Australia: www.blackbox.eu
60
select
Always Connect
. If you want to establish a PPTP session only when there is
a packet requesting access to the Internet (i.e. when a program on your computer
attempts to access the Internet), select
Trigger on Demand
.
Idle Time:
Auto-disconnect the router when there is no activity on the line for a
predetermined period of time. Select the idle time from the drop down menu. Active
if
Trigger on Demand
is selected.
IP Assigned by your ISP:
If your IP is dynamically assigned by your ISP, select the
Dynamic
radio button. If your IP assigns a static IP address, select the
Static
radio
button. This will take you to another page for inputting the IP address information.
MAC Address:
If your ISP requires you to input a WAN Ethernet MAC, check the
checkbox and enter your MAC address in the blanks below.
Candidates:
You can also select the MAC address from the list in the Candidates.
DNS:
If your ISP requires you to manually setup DNS settings, check the checkbox
and enter your primary and secondary DNS.
RIP:
To activate RIP, select
Send
,
Receive
, or
Both
from the drop down menu. To
disable RIP, select
Disable
from the drop down menu.
MTU:
Enter the Maximum Transmission Unit (MTU) for your network.
Network Address Translation:
Enables or Disables the NAT function. To apply
this interface as router mode please select Disable. Due to default firewall feature,
if you would like to use router mode, you have to input the packet filter rules you
would like to forward in
Configuration
->
Firewall
->
Packet filter
Click
Apply
to save your changes. To reset to defaults, click
Reset
.
