Black Box ET0010A, Cli User Manual

Page: 113 / 212

Troubleshooting
114 ETEP CLI User Guide
Example
This example enables the policy-packet-count command.
admin>
configure
config> policies
policies>
policy-packet-count enable
This example displays and then resets the policy packet counters in the SPD and SAD.
admin> show policy-packet-count-clear
Related topic:
●
“Discarded Packets” on page 115
●
“policy-packet-count” on page 177
●
“show” on page 187
Additional Diagnostic Tools
Additional tools for diagnosing problems with the ETEP are available from ETEMS. These tools are
described in
Table 60 . Tools that are available from both ETEMS and the CLI are listed in Table 61 .
Table 60 ETEMS diagnostic tools
ETEMS Feature Description
Retrieve log files from an
appliance
Allows you to examine an individual log file for a specific log facility
or view a concatenated file of all log messages.
SNMP traps To monitor ETEP events, system status, and warning and error
conditions, ETEMS lets you set up SNMP trap reporting.
Table 61 Tools available from the CLI and ETEMS
Feature Description
View port status Shows information about the local and remote ports (see “Port
Status” on page 115 ).
View discarded packet counts Shows the number of discarded packets and the reason for the
discards. A list of possible reasons for discarded packets is
provided in “Discarded Packets” on page 115 .
View encryption statistics Shows the number of packets successfully encrypted and decrypted
(see “Encryption Statistics” on page 116 ).
View a variety of frame and
packet counters
See “MAC Statistics” on page 116 for a complete list of counters.
Export the security policy
database (SPD) and security
association database (SAD) to a
CSV file
See “Policy and Security Association Databases” on page 117 for
information about using these files to troubleshoot policy problems.