Black Box ET0010A, Cli User Manual

Page: 115 / 212

Troubleshooting
116 ETEP CLI User Guide
Encryption Statistics
Encryption statistics show the number of packets successfully encrypted and decrypted. Inbound packets
are received on the remote port and decrypted before being sent to the trusted network. Outbound packets
are encrypted and sent from the remote port across an untrusted network. The encryption statistics
counters are 32-bit counters, which roll over after reaching their maximum value.
To view encryption statistics:
●
From the CLI, enter the show all command
●
In ETEMS, click View > Statistics
MAC Statistics
MAC statistics show frame and packet counters on the ETEP local and remote ports. The MAC statistics
counters are 64-bit counters, which roll over after reaching their maximum value.
To view MAC statistics:
●
From the CLI, enter the show all command
●
In ETEMS, click View > Statistics
Counters
Counters are displayed for transmitted and received packets on the local and remote ports. The counters
are shown for packets that are received on the appliance’s local port and transmitted from its remote port,
and vice versa: RxLocalPort, TxRemotePort, RxRemotePort, TxLocalPort.
●
Bytes
●
Packets
●
Multicast packets
●
Broadcast packets
●
Oversize packets
●
Undersize packets
●
Fragments
●
Control frames
●
Pause frames
●
Jabber frames
●
CRC errors
Local port unsupported VLAN type Remote port policy not IPSEC
Remote port unsupported VLAN type Remote port failed decrypt check
Local port unsupported MPLS type Remote port crypto error
Remote port unsupported MPLS type Remote port failed auth check
Local port non IP
Table 62 Discard packet descriptions
Reason Reason continued