Black Box ET0010A, Cli User Manual

Page: 186 / 212

Commands
ETEP CLI User Guide 187
The scope of the restore-policy-set command is limited to the configuration mode in which you are
operating when the command is issued: it restores either the management port policies or the local-site
policies on the data ports.
Example
The following example restores the backup copy of the local-site policies.
config> policies
policies>
local-site-policies
local-site-policy> restore-policy-set
show
Description
The show command displays information that is useful for troubleshooting problems with the ETEP, such
as date and version information, the configuration running on the appliance, and log file contents. The
show command is available in command mode to Administrator and Ops users.
The show command is also available to the Administrator from several configuration modes, such as
policy-config, ipsec-config, user-config, and banner-config.
User Type
Administrator and Ops have access to the show command from command mode. Only the Administrator
can access the config mode show commands.
Hierarchy Level
Command mode, banner-config mode, ipsec-config mode, policies mode, and user-config mode
Syntax
show {<attribute>}
Attributes
all -
Displays a collection of troubleshooting data, including running-config, encryption statistics,
MIB2 statistics for the local, remote, and management ports, discarded packets, SPD, SAD, MAC
statistics, ARP cache, route table, and system data such as disk and memory usage.
audit-log -
Displays the contents of the audit log file. This command is available only to the
Administrator user.
bootloader-version -
Displays the bootloader version that is loaded on the ETEP.
dataplane-log -
Displays the contents of the data plane log file.
date -
Displays the internal clock’s date and time settings in the following format: <day> <month>
<date> <time in UTC> <year>.
discards -
Shows the number of discarded packets and the reason for the discards.
distkey-log -
Displays the contents of the distkey log file.