18
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
CHAPTER 7: OPERATION OF EMERALD SYSTEM
7.1 LED IDENTIFICATION
Front panel
There is one LED on the front panel of an Emerald unit (integrated into the power-button on the Receiver) - called the STATUS LED.
The STATUS LED will light up when the unit (Receiver or Transmitter) is turned on. The STATUS LED “blinks” when a unit is being
upgraded.
Rear panel
Two LEDs are built into the RJ-45 connectors on the Emerald Receiver and Transmitter. The definition of the operation of these
LEDs is shown in Table 7-1.
TABLE 7-1. RJ-45 CONNECTOR LEDS ON THE REAR PANEL
OF THE EMERALD RECEIVER AND TRANSMITTER
LED
STATUS
DESCRIPTION
Activity
Green ON
Linked OK
Green Flashing
Transmit/Receive activity
Green OFF
No Link
Link Speed
ON
10G
OFF
No valid link
7.2 ACCESSING THE SYSTEM
A connection is established using the OSD on an Emerald Receiver or Boxilla Manager. Once you are connected, a series of
messages will be displayed on the screen to inform you of the progress of the connection. You will be able to interact with the
remote workstation as if it were located at your desk.
NOTE: If the remote workstation is powered off, the Emerald system will display a “black” screen for video when a connection
is made.
