14
6- OR 12-BUFFER TUBE FANOUT KIT
NOTE
Because buffer tubes are semi-rigid, they require careful handling to
compensate for their “memory” and “springy” nature. Buffer tubes will
tend to quickly return to their original position after handling. Whenever
you use tape to anchor the tubes down, use care to control the tubes
when removing the tape.
8. Lower the insert section into the Buffer Tube Fanout body and press it into
place (see
Figure 3-10
).
Figure 3-10. Pressing the Insert Section into Place.
9. Align the top of the Buffer Tube Fanout body with the bottom and press
them together until the top snaps into place (see
Figure 3-11
).
Figure 3-11. Pressing the Bottom and Top Together.
10. Remove the tape from the buffer tube.
11. Separate another buffer tube and assemble the next Buffer Tube Fanout by
repeating steps 2 through 10.
Summary of Contents for EFN06-24
Page 3: ......
