877-877-2269 | blackbox.com
Page 20
EC24U3032
877-877-2269 | blackbox.com
Chapter 3: Changing the Cabinet’s Configuration
3. Changing the Cabinet’s Configuration
3.1 Casters and Leveling Legs
CAUTION: To install casters or levelers, you must tip the enclosure onto its side. The enclosure is very heavy, so you may need
several people to lay it on its side. Do not lay the enclosure on its front or back. This may damage the door and
hinges.
HINT: Removing the doors and side panels before tipping will help reduce the enclosure’s weight and help prevent damage to the
side panel locks.
Figure 3-1. Casters and levelers.
Caster Mounting:
1. Tip the enclosure and lay it onto its side.
2. Place a caster assembly over the four threaded studs located in one of the recessed areas in the bottom of the enclosure.
3. Thread one
5
⁄
16
-18 hex nut onto each of the four studs and tighten with a
1
⁄
2
" socket or nut driver.
4. Repeat Steps 2 and 3 for the three remaining casters.
Adjustable Leveler Mounting:
1. Tip the enclosure and lay it onto its side.
2. Place a leveling leg into one of the four
1
⁄
2
"-13 threaded holes found at the corners of the enclosure.
3. Using a
3
⁄
4
" open-end wrench, tighten the levelers to the desired position.
4. Repeat Steps 2 and 3 for the remaining levelers.
