12
COMBO HEADSET
is equipped with a quick
disconnect for convenience
only.
3.2 Inserting the Battery
1. The battery chamber is
located on the side of the
receiver. To open the
battery chamber, use your
fingernail to pull the small
flap up (Figure 3-4).
Figure 3-4. Opening the Battery Chamber.
2. When the flap is open,
remove the chamber from
the headset (Figure 3-5).
Figure 3-5. Removing the Chamber from
the Headset.
3. Insert the battery in the
chamber with plus (+) side
of battery facing the plus (+)
side of chamber
(Figure 3-6).
Figure 3-6. Inserting the Battery into the
Chamber.
4. Put the battery chamber
back into the headset
(Figure 3-7). When it is time
to replace the battery, a
warning signal will sound in
your headset every
10 seconds.
Figure 3-7. Putting the Battery Chamber
Back into the Headset.
5. The headset ships with high-
capacity batteries. A smaller
battery can also be used.
Call Technical Support for
details. If using the alternate
battery type, insert the
enclosed blue battery
adapter into the battery
chamber (Figure 3-8).