Introduction
IntroductopnIntroduction
33
CHAPTER 5: The OSD functions
5.11 Changing the keyboard language - F8
You can change the keyboard language from US English (QWERTY)
US
to German
(QWERTZ)
DE
or French (AZERTI)
FR
.
To change the Language:
1. In the Setup window (F3), press
F8
until you reach the desired language.
2. Press
Esc
.
5.12 Changing the OSD display hotkey – F9
The default hotkey to display the OSD, is
Shift
,
Shift
. You can replace this hotkey
with any of the following:
•
Ctrl, Ctrl
•
Ctrl,
F11
•
Ctrl, F12
With a choice of 4 different hotkeys, you can operate up to 4 OSDs from 1 KVM
position. Each OSD needs a different display hotkey. This is useful when cascading
systems.
To change the hotkey:
1. In the Setup window (F3), press
F9
. The hotkey changes from
Shift,
Shift
to
Ctrl,
Ctrl
.
Continue pressing until you reach the required hotkey.
2. Press
Esc
. The new hotkey is set. From now on, use the new hotkey to display the
OSD.
5.13 Exiting the OSD
When the OSD is displayed press
Esc
to exit the OSD and remain switched to the
current computer.
