Introduction
IntroductopnIntroduction
25
CHAPTER 5: The OSD functions
5.1.1. The Computers section
The Computers section displays the computers in groups of eight.
Navigate between the groups with the
Page
Up
and
Page Down
Arrow keys.
In this section you select computers - discussed below.
5.2 Line Color codes
Each computer line can be one of three colors as follows:
Yellow
Connected and switched on computer.
Black
Connected and switched on computer with a Local Workstation
attached and presently being used locally. After remaining idle for
30 seconds, it changes to
yellow
.
The ClassWork Junior Supervisor
and the local user can both work on the remote computer with a one
second Access-Timeout. This means that when one of them stops
working for one second the other can take control.
Blue
Unconnected or switched off computer.
5.3 Selecting a Computer
To select a computer:
1.
Navigate to the desired computer with the Up
and Down
Arrow keys.
Or
Type the computer number. It will appear in the “SELECT COMPUTER” line. See
Figure 5-1.
2. Press
Enter
. The selected computer’s screen replaces the Supervisor’s screen. A
Confirmation label appears showing which computer is accessed. See Figure 5-2.
Control and monitor the computer from the Supervisor KVM position.
Figure
5-2 The Confirmation label
To return to the OSD:
Press
Shift
,
Shift
.
To return to the Supervisor computer screen:
Press
Shift
,
Esc
.
