724-746-5500 | blackbox.com
Page 15
AVSP-HDMI1X2
Chapter 3: Installation
3. Installation
WARNINGS: Before installation, make sure you power off all devices that will be
connected to this system.
Make sure that all devices you will connect are properly grounded.
Place cables away from fluorescent lights, air conditioners, and
machines that are likely to generate electrical noise.
Use one HDMI male-to-male cable to connect a video source to the video splitter
input (SOURCE). Connect multiple monitors or TVs to the video splitter’s output
ports as shown in Figures 3-1 through 3-3.
Plug a set of audio jacks from the speaker to the splitter’s audio port.
Turn on your video source only after you’ve made all the connections.
