12
CHAPTER 1: HEADLINE
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
CHAPTER 5: IR CONTROL
The Matrix Switcher features one built-in IR receiver to receive an IR signal from an IR remote to enable IR control. If the external IR
receiver or other IR control device needs to be used, the IR IN port on rear panel can be connected.
1. Standby button: Press to enter/exit standby mode.
2. INPUTS: Input channel selection buttons, same with the corresponding front panel buttons.
3. OUTPUTS: Output channel selection buttons, same with the corresponding front panel buttons.
4. Menu buttons:
• ALL: Select all inputs/outputs.
To convert an input to all outputs:
Example: Input 1 to all Outputs:
—>Press INPUTS 1 + ALL + ENTER
• EDID management button:
1. One input port learns the EDID data from one output port.
Example: Input 2 learns EDID data from output 4:
—> Press EDID + INPUTS 2 + OUTPUTS 4+ ENTER
2. All input ports learn EDID data from one output port.
Example: All input ports learn EDID data from output 3:
—> Press EDID + ALL + OUTPUTS 3 + ENTER
• CLEAR: Withdraw button.
• ENTER: Confirm operation.
FIGURE
5-1.
IR
REMOTE
CONTROL
1
2
3
4
