30
CHAPTER 8: RS-232 CONTROL
1.877.877.2269
BLACKBOX.COM
8.3.7 EDID MANAGEMENT
TABLE 8-7. EDID MANAGEMENT
COMMAND
FUNCTION
FEEDBACK EXAMPLE
EDIDMINIT.
Restore the factory default EDID data for each input
All Input EDID Set
Default!
System Initialization......
Black Box
AVS-HDMI2-8X8-R2
V1.0.0
Power ON!
Front Panel UnLock!
EDIDUPGRADE[XX].
Upgrade EDID via Serial Port
[XX]=00 to 08
(
xx=01 to 08 is the number of input port (enable EDID user-defined for corresponding
HDMI input). If xx=00, it means all input ports (enable EDID user-defined for all HDMI
inputs).
NOTE: EDID user-defined can be used once. If you switch to another EDID or exit, it will
not be saved.
[XX]=U.
(
xx=U means user-defined for built-in EDID. It can be saved in machine for use at any time.)
NOTE: It can user-defined. There is only one built-in EDID. After finishing it, machine
still uses the previous built-in EDID.
After it receives commands, the machine will remind EDID file (.bin) to send within 10
seconds.
Note: In order to guarantee the data to be received normally, disconnect all
HDBaset before sending the command(s).
File size: 256
Baud rate:115200bps Quired
time: About 0 second
Please wait...
Send Completed! User Define
EDID Upgrade OK By RS232
Or GUI!
EDID/[XX]/[YY].
Input ports xx use built-in EDID yy
[xx]=00 to 08
(xx=01 to 08 is the number of the input port. If xx=00, it means all input ports.)
[yy]=01 to 09
(yy=01 to 08 means built-in EDID that cannot be user-defined. If the yy=09, it means
user-defined EDID.)
Input All EDID Upgrade OK
By 09 Internal EDID!
EDIDGOUT[XX].
Read and print EDID of HDMI output
[XX]=01 to 08 is the number of the output port.
EDIDOUT04:
……
EDIDM[XX]B[YY].
Input port [yy] follows the EDID from output port [xx].
[xx]=01 to 08
(xx=01 to 08 is the number of the output port.)
[yy]=00 to 08
(yy=01 to 08 is the number of input port. If the yy=00, it means all input ports.)
Input 06 EDID Upgrade OK
By 01 EXT EDID!
/+[X]/[YY]:XXX.
Send serial data to local
[X]= 1--2400; 2--4800; 3--9600; 4--19200; 5--38400; 6--57600; 7--115200.
[yy] means the output port that sent serial data. yy=01 means local output.
xxx.
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
