63
APPENDIX C: Rackmounting
Appendix C: Rackmounting
We offer a Rackmount Kit (our product code RMK19WX) for mounting a
ServSwitch™ Wizard Multimedia KVM Extender’s Unit A or Unit B in 1U of
vertical space in a 19" rack. It consists of a front-paneled rack shelf and a pair of
countersunk screws. To use this Kit to mount an Extender Unit, take these steps,
referring to Figure C-1 below:
1. Place the Extender Unit on the Kit shelf so that the RJ-45 jack and auxiliary
LEDs on its side are facing forward and are aligned with the cutouts in the
shelf’s front panel. In this position, the two screwholes on the bottom of the
Unit should be lined up with the matching holes on the bottom of the shelf.
2. Screw the two screws included with the Kit through the holes in the shelf, into
the bottom of the Unit.
3. Once you’ve attached the Unit to the shelf, match the holes at the ends of the
shelf’s front panel to an appropriate set of matching holes on your equipment
rack. Screw the Unit assembly to the rack using your own screws, bolts, cage
nuts, etc. (not included).
Figure C-1. Rackmounting an Extender Unit (Unit A shown).
