48
SERVSWITCH™ WIZARD MULTIMEDIA KVM EXTENDER
5.8 Mouse Control
If you have attached two CPUs to your ServSwitch Wizard Multimedia KVM
Extender, another convenient way to select between them at the primary control
station is by using a three-button mouse. Simply hold down the central mouse
button or “wheel” button, then click on the left-hand mouse button to switch to the
other CPU (the one you don’t currently have selected).
If you want to do this, you’ll have to go into configuration mode (see
Section 4.2.2
) and issue the [M] [2] [Enter] command to enable mouse switching.
(The Extender comes from the factory with mouse switching disabled.) To turn
mouse switching back off after you’ve enabled it, issue the [M] [1] [Enter]
command.
Be aware that if you enable mouse switching and use a regular three-button
mouse to do it, you won’t be able to use the mouse’s center button for any
application functions or other non-switching purposes. In fact, the Extender will
tell the CPU that it has a 2-button mouse attached to it in this situation. (The wheel
button on IntelliMouse and similar mice is not disabled this way.)
