ServSwitch Agility Dual with VNC
724-746-5500 | blackbox.com
Page 24
4.1.4 Browser-Based Configuration Utility
The browser-based configuration utility within all local transmitter and remote receiver units requires a network connection
between a ServSwitch Agility unit and a computer. This configuration utility allows you to perform all of the following functions:
• View/edit the IP network address and netmask,
• Configure separate IP network addresses for video, audio and USB,
• Configure multicast settings (on Remote units),
• Configure video bandwidth settings (on Local units),
• View the current video output (on Local units),
• Perform a firmware upgrade,
• Perform a factory reset.
4.1.4.1 Connecting a Computer System for Browser-Based Configuration
1 Connect a suitable network cable to the System (Gigabit Ethernet) port on the front panel:
Connect the ServSwitch Agility to a suitable network switch.
2 Connect the other end of the link cable to a network switch.
3 Similarly, link your computer to the same, or different, switch located on the same network. Note: A Gigabit connection is not
essential for configuration purposes.
4 If not already switched on, power up your computer and the ServSwitch Agility Dual with VNC unit. You are now ready to use
the browser-based configuration utility.
S e
r v
S w
i t c
h
A g
i l i t
y
D u
a l
™
B
L
A
C
K
B
O
X
K
V
M
o
I
P
E
X
T
E
N
D
E
R
REM
OTE
