Appendices
724-746-5500 | blackbox.com
Page 55
Mouse Latency Allowance
This option is used during calibration to account for latency delays that may be caused as signals pass through a device.
During calibration, the Agility Dual with VNC waits for 40ms after each mouse movement before sampling the next. If a device
adds a significant delay to the flow of data, the calibration process can be lengthened or may fail entirely. The value entered here
is added to (or subtracted from) the default 40ms sampling time.
Note: You can enter negative values (down to -40) in order to speed up the calibration process when using fast KVM switches.
Use this option with caution as it can adversely affect the calibration process.
Mouse Rate
Defines the rate at which mouse movement data are transmitted to the system. The default option is 20ms, which equates to 50
mouse events per second. This is used to slow down the rate in exceptional circumstances but normally requires no adjustment.
Single Mouse Mode Mouse Switch
Select the mouse button combination to exit from single mouse mode (when active).
Use Quick Mouse Calibration
Invokes optimized calibration techniques that handle the majority of mouse types.
Behaviour for admin connections when limit reached
Determines what should occur when the limit on VNC users is reached. Options are:
Replace oldest connection
,
Replace newest
connection
and
Don’t replace
. Only non-administrator connections can be terminated in this way.
Enable Virtual Media
When ticked, allows the Virtual Media features to be used.
Reset Unit
Performs a complete cold boot of the Agility Dual with VNC unit.
