Mini-Cat5 Extender Wallplate Transmitter
7
5.
Apply a video source to the system and
check for an image at each receiver, then
set the compensation Potentiometer (pot)
for best possible image.
Note:
If the source is Component Video
(YPbPr) an HD15 to 3 RCA cable will
be required for each HD15 connector.
If the source is composite video with stereo audio, a similar
cable will be needed. The RCA connectors are typically yellow
(instead of green) for video and red/white for audio. To transmit
CV and stereo audio, please read section 2.3 below.
2.2 Video Compensation Adjustment
If the length of Cat5 cable is long, you need to adjust the receiver
(AC602A) to compensate for the signal in order to perfect the image.
Apply a video source to the system and check for an image at each
receiver, then set the compensation Potentiometer (pot) for best
possible image.
Start with the compensation pot fully CCW (least compensation), then
slowly turn it clockwise and check for the bleeding of left to right
horizontal lines on the screen.
Note dark line bleeding as a dark
line to the right
Note dark line has a clean transition
Note dark line bleeding as a white line
to the right!
