724-746-5500 | blackbox.com
Page 14
General buttons on the remote control:
Resolution: Press this button to toggle through the supported output resolutions to
get the best quality picture.
Reset: Press this button to reset to the default settings (Composite video, 800 x 600,
etc.), no confirmation.
PC: Press this button to select PC (VGA) input.
YPbPr: Press this button to select the Component input.
Video: Press this button to select video (Composite) input.
S-Video: Press this button to select S-Video input.
Menu: This will only activate if you have YPbPr, video, or S-Video active as a main
input.
Exit: Press this button to exit without saving a configuration setting.
Enter: Press this button to confirm a selection.
p
,
q
,
t
,
u
: Use these buttons to navigate the menu system. If the menu is
not active, the LEFT and RIGHT buttons allow remote control.
and -: Use these buttons to toggle the audio level.
PiP Control buttons on the remote control:
Mode: Toggles between PiP size or disables it. Select from three different sizes. The
fourth option will disable the PiP window.
Move: Press this button to move the PiP window around the screen. This is a coarse
adjustment move and cannot be moved in smaller increments.
Source: Press this button to select the PiP source. You can choose between S-Video
and Composite.
Audio: Press this button to adjust the PiP audio feed.
NOTE: In PiP mode, the VGA input acts as a main input only, and the PiP window
will only support Composite or S-Video input.
4.2 Menu Options
The menu options listed in this section are accessible from both the button on the
unit and remote control. You can control the menu functions activated by the
MENU button via either the remote control or buttons on top of the unit. To access
the menu, press the MENU button.
Chapter 4: Operation
