6
applications during installation and automatically associates the appropriate command-line option for
full-screen mode and looping among others.
5.
Schedule a particular transmitter or receiver for LivePlay or LocalPlay at a certain time. By default,
each receiver comes up in LivePlay mode on power-up if there is no LAN connection.
6.
Schedule tasks at certain times on certain receivers using a Windows application.
7.
Log LAN diagnostics if a connection is lost to a particular transmitter or receiver.
8.
Immediately halt video and/or audio to any or all components.
9.
Broadcast an emergency message using EMCast to all receivers on the video network.
Conductor can be used to control and assign transmitters and receivers when the host computer is plugged
into any transmitter’s USB port. However, Conductor can only be used to schedule tasks on the host
computer. Conductor can be used on multiple computers connected to the video LAN but should only be
used on one computer for scheduling or configuring the network.
