7
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
CHAPTER 2: OVERVIEW
2.4 HARDWARE DESCRIPTION
Section 2.4.1 describes the front panels of the TX and RX units. Section 2.4.2 explains the back panel of the TX unit. Section 2.4.3
shows the back panel of the RX unit.
2.4.1 FRONT PANELS, TX AND RX UNITS
1 2 3 4 5
FIGURE 2-1. FRONT PANEL, TX OR RX UNIT
TABLE 2-1. TX UNIT OR RX UNIT FRONT-PANEL COMPONENTS
NUMBER IN
FIGURE 2-1
COMPONENT
DESCRIPTION
1
Mode button
Switches the mode for the RS-232 port
Normal: RS-232 HDBaseT passthrough
Update: RS-232 firmware update
2
Power LED
On: The device is powered on
Off: The device is powered off
3
Status LED
Blinking: The device is working properly
Off: The device is not working properly
4
HDCP LED
On: Audio and Video signal is HDCP protected
Blinking: Audio and Video signal is not HDCP protected
Off: No Audio and Video signal
5
Link LED
On: Link between transmitter and receiver has been established
Off/Blinking: Connection exceptions exist between the transmitter and receiver
