background image

Pro-WAV™ 200 Lite 
Wi-Fi rAnGe eXtenDer sYsteM 
QUiCK instALL GUiDe

Results may vary depending on building layout, type of construction and other environmental factors 

including Wi-Fi traffi c, Microwaves Ovens, Cordless Phones, etc.

FCC NOTICE: 

The use of all radio equipment is subject to regulations in each country. To comply with FCC part 15 

rules in the United States, radio equipment must only be used in systems that have been FCC certifi ed. It is the 
responsibility of the user/professional installer/operator to ensure that only approved equipment/systems are 
deployed. To ensure FCC part 15 compliance, Luxul amplifi er products should only be installed in certifi ed systems by 
licensed professionals.

FCC Certifi cation Support for OEMs:

 Luxul Wireless offers FCC certifi cation assistance and engineering support for 

qualifi ed OEM’s interested in certifying complete amplifi ed WLAN systems. Please contact us for details.

LUXUL WIRELESS   |   357 South 670 West, Lindon, UT, 84042

p: 801-822-5450     f: 801-822-5460

www.luxulwireless.com 

LUX-QIG-100620090210-PW20024LITE

© 2009 Luxul Corp. All rights reserved. 

For use with the ECB3500 WAP

Congratulations on your purchase of a Luxul Wireless Pro-WAV Lite™ Wi-Fi Range Ex-
tender System. Pro-WAV systems are simple to install. In just a few short steps, you will 
be able to enjoy the benefi ts of a farther reaching, clearer wireless signal. 

LUXUL WireLess ProDUCTs CoVereD By This gUiDe

PW-200-24-Lite

- Pro-WAV Lite 2.4GHz indoor Wi-Fi Range Extender System 

TroUBLeshooTiNg

Weak or non-existent coverage.

1.  Make sure the cables are properly connected and that there is power to the 

Pro-WAV 200 Lite Wi-Fi System.

2. Ensure that the X-WAV antenna is properly positioned. The antenna should be facing 

the direction of the area to be covered with a minimum of 2 feet (.6 meters) with no 
obstructions in front of the antenna. Luxul wireless signals are superior for penetrating 
wood, concrete, and stucco, but all wireless signals can be disrupted by certain 
obstructions, including large metal objects. Try orienting the antenna where more 
line-of-sight access to the desired coverage area is available.

If after checking the above items, your Pro-WAV 200 Lite System still does not seem to be 
functioning properly, please contact: Luxul Wireless Technical Support at: support@luxul-
wireless.com regarding Antenna and enclosure.
Luxul Wireless products include a Limited One Year Warranty

Summary of Contents for PW-200-24-Lite









Reviews: