Pro-WAV™ 200 Lite QUiCK instALL GUiDe
The Pro-WAV 200 LiTe sysTem iNCLUDes The foLLoWiNg:
• Metal enclosure with space for mounting the EnGenius ECB3500
Internally
• Integrated X-WAV™ CP
(Circularly Polarized)
Antenna
(XW-24-FP7 - 7dBi High Gain 2.4GHz)
• Ethernet cable
• Coax cables (3) (N-Male to RP-TNC (1), N-Male to N-Male (2))
• POE
(Power-Over-Ethernet)
injector and 48VDC Universal Input Power Supply
• Mounting hardware
• Ethernet pass through
• Velcro
• Quick Install Guide
geTTiNg sTArTeD: ADDiTioNAL iTem reQUireD
• EnGenius ECB3500 Wireless Access Point (WAP)
Included with the ECB3500: Wireless High power multi-function 7+1 AP (ECB3500), 12V/1A
Power Adapter, CAT5 UTP Cable, QIG, CD (User’s Manual), 5dBi 2.4GHz Dipole Antennas (2)
• External Ethernet cable from your data source/network (Max. length 329’ or 200 meters).
NOTE:
Disconnect all power before connecting or disconnecting any cables, coax or
antennas to or from this device. Failure to do so will void your warranty.
seTTiNg UP yoUr Pro-WAV 200 LiTe sysTem
Attaching the antennas to the Pro-WAV enclosure
1. Connect the two X-WAV antennas to the
antenna mount. Position the antennas so the
antennas N connector is at the top of the
mount
1
(diagram 1).
2. Attach the antenna mount to the top of the
enclosure using the washers and nuts provided
2
.
3. If mounting the Pro-WAV 200 Lite high in your
Wi-Fi coverage area the antenna mount may be
bent slightly downward to focus coverage.
1
2
diagram 1
moUNTiNg yoUr Pro-WAV 200 LiTe sysTem
The Pro-WAV 200 Lite system may be mounted to any surface using your fasteners or
mount the unit above a drop ceiling using the optional drop ceiling mounting arms. See
diagram 8, below, to mount your Pro-WAV 200 Lite system using the optional drop ceiling
mounts, Part Number HDW-PWM.
diagram 8
Optional Drop
ceiling Mounts
